Twill Imitation Memory fabric,
150cm Outdoor Breathable Fabric,
Twill Breathable Outdoor Fabric
100%P 2/3 Twill Breathable Outdoor Imitation Memory Fabric Waterproof For Jacket In Stock
1 . Descriptions:
Memory fabrics are mainly woven fabrics with excellent properties such as shape memory effect, high recovery deformation, good shock resistance and adaptability, and are easily woven into a fiber form of thread.
For this fabric, we prepare many colors in stock, and all these are high quality. So you can choose colors and we can send you for sampling.This fabric is 100%P .The yarn count is 75D/144F*75D/72F. We finish this fabric dyed and WR.So this fabric is breathable and waterproof. According to your special requirements, we can do many finishing like bonding, cire,lamination and etc.Also this fabric has many choices of color.
2 . Specifications:
100%P 2/3 Twill Breathable Outdoor Imitation Memory Fabric
|Color||various colors available|
|Standard||can meet REACH,ROHS,EN71-3|
|Packaging||by rolls as 50m or according to your requirements,polybags,vacuum packing|
3 . About Memory Fabric:
The literal interpretation means that the fiber material used can be restored to its original shape and characteristics under the stimulation of specific external conditions (such as heat, mechanical, optical, magnetic, or electrical, etc.), that is, it can remember the shape, so that weaving The finished fabric has the characteristics of shape memory. Suitable for making suits, trench coats, jackets, ladies suits, etc. At present, the dyeing and finishing processes of memory fabrics on the market are mainly cloth-entering-refining-dyeing-out-of-cylinder-setting. The main step is to first raise the temperature to 90 ° C for pre-treatment, then lower the temperature to below 60 ° C, and then drain the water, then add water, add dye and help U at 40 ° C, and maintain the temperature at 1 ° C / min for a certain time. 70 ° C, then heat up to 90 ° C at a rate of 0.5 ° C / min, then heat up to 125 ° C at a rate of 1 ° C / min for 40 minutes, and then cool down to 1 ° C / min 90 ° C, and then reduce the temperature to 70 ° C at a rate of 0.5 ° C / min, then open the cover and naturally cool it to below 60 ° C to drain water, then wash it into water for post-treatment, and raise the temperature to 140 ° C during post-treatment.
4 .Differences Between Imitation Memory Fabric And Memory Fabric:
1. Identification based on the elongation characteristics of the memory filament. As a new type of fiber, the ductility of the memory yarn is weakened with the improvement of the production process of the raw material factory. However, the ductility of the memory fiber is still obvious compared with the general fiber. The so-called ductility is the tendency of the two ends of the fiber to extend under the action of external forces. This feeling can refer to the feeling when POY stretched. This is the main method of identifying memory wires.
2. At present, a kind of imitation memory silk appears on the market. This kind of imitation memory silk is mainly used for yarn dyeing. The feeling and the like are also very close to the real memory silk, but to achieve the true feel of the memory silk, its F number must be a high F number. At present, it is difficult for real memory silk to achieve such a high F-number.
5 .More pictures:
Contact Person: admin