|57 / 58 ''
waterproof outdoor fabric,
outdoor water resistant fabric
100%P Water Repellent Outdoor Fabric High F Two-tone Windproof Breathable For Sports Wear
1 . Descriptions:
The fabric is 100%P high F two-tone outdoor fabric. This is a kind of fabric that is very suitable for outdoor clothing. It has a unique two-tone pattern and has strong air permeability. After subsequent treatment, this fabric can achieve waterproof and windproof effect, and it is very suitable for outdoor jacket or windbreaker.
2 . Specifications:
The characteristics of cationic lie in the double color effect, which can replace some color woven double-color fabrics to reduce the cost, but there is nothing to be done with color woven fabrics. It's an old product. It is commonly used for lining/curtain fabric/decorative fabric.
Cationic fabric is not wear-resistant fabric, it is generally used in the warp direction with cationic silk, and in the weft direction with ordinary polyester yarns, which are also dyed with dyes respectively.
3 .What is the function of the outdoor fabric?
1. The warmth retention property
Although heat preservation is closely related to fabric thickness, outdoor sports do not allow clothing to be too heavy, so it is necessary to keep warm and light to meet the special requirements of outdoor sports clothing. The most common method is to add special ceramic powder containing chromium oxide, magnesium oxide and zirconia, especially nano-sized ceramic powder, into the spinning solution of synthetic fiber such as polyester.
It can absorb the visible light such as sunlight and convert it into heat energy. It can also reflect the far infrared ray emitted by the human body itself.
2. Waterproof and moisture permeability
Sports meeting sends out a large amount of sweat, and outdoor is hard to avoid encountering rain and rain, which is a pair of contradictions: to be able to prevent rain and snow from getting wet, and to be able to timely release the sweat out of the body.
Waterproof and moisture permeable clothing is in using the surface tension of water features, on the fabric coating a layer of PTFE (with the "king of the corrosion resistant fiber" teflon PTFE the same chemical composition but different physical structure) chemical coating, the surface tension of the enhancement of the fabric to make water tightening and cannot be spread out as far as possible, infiltration of fabric surface, thus unable to through the porosity of the fabric tissue. At the same time, the coating is porous, and the water vapor in a single molecular state can be distributed to the surface of the fabric through the capillary channels between the fibers.
How can we obtain the windproof effect of the fabric?
|Rely on the density of the fabric itself to achieve windproof effect
The most typical examples are knitted fabrics and woven fabrics . The woven fabrics are not as porous as knitted fabrics due to their high density and interlacing points. So when you wear it in winter, it's warmer, which means the wind doesn't leak out. In woven fabrics, the higher the density, the better the wind resistance, . But relying on the fabric density to prevent the wind is not better than through the coating or film processing of the fabric .
|Be coated or lamination
Basically all fabrics can achieve wind proof effect through this kind of means . It can accomplish a bit not ventilated, namely breathability test is zero .
4 . Applications:
It is commonly used in mountaineering wear, dust coat and winter coat, the clothes are worn in outdoor activities or adventure. It may rain at any time out of doors, so we will generally consider the function of waterproof of our clothes!
5 . More pictures:
Contact Person: Ms. Sara Shi