|Width:||57 / 58 ''||Style:||3/3 Twill|
polyester cationic fabric,
plain woven fabric
3/3 Twill 100%P Cationic Fabric Herringbone Two-tone Coating Waterproof For Skiing Wear
1 . Descriptions:
This fabric is 3/3 twill and 100%P . It is one kind of cationic fabric with herringbone pattern and has two-tone look . Its yarn count is 300D*150D . We finish it with coating . So it is breathable and windproof .The fabric is commonly used in mountaineering wear because this fabric has special two-tone look . It is breathable and waterproof for sports wear .
Also ,we can do other finishing if you want to obtain its functions , just like cire ,bonding or TPU. After this , it can be made waterproof and windproof . This fabric is always used to product winter wear ,sports wear and etc.
2 . Specifications:
Name: 3/3 Twill 100%P Cationic Fabric Herringbone Two-tone Coating Waterproof For Skiing Wear
Yarn Count: 300D*150D
Weight: 216 GSM
Color: Various color for you to choose or customize
Features: 3/3 twill harringbone pattern
Finish process: Dyed ,waterproof ,coating or customize
Traditional fabrics, although it is environmentally friendly, but it is not resistant to washing. The effect of cold resistant is not very well . Compound is to combine two or three different functional fabrics, so that it has these functions at the same time, so that the quality of clothing has a qualitative improvement.
1. The warmth retention property
Although heat preservation is closely related to fabric thickness, outdoor sports do not allow clothing to be too heavy, so it is necessary to keep warm and light to meet the special requirements of outdoor sports clothing. The most common method is to add special ceramic powder containing chromium oxide, magnesium oxide and zirconia, especially nano-sized ceramic powder, into the spinning solution of synthetic fiber such as polyester.
It can absorb the visible light such as sunlight and convert it into heat energy. It can also reflect the far infrared ray emitted by the human body itself.
2. Waterproof and moisture permeability
Sports meeting sends out a large amount of sweat, and outdoor is hard to avoid encountering rain and rain, which is a pair of contradictions: to be able to prevent rain and snow from getting wet, and to be able to timely release the sweat out of the body.
Waterproof and moisture permeable clothing is in using the surface tension of water features, on the fabric coating a layer of PTFE (with the "king of the corrosion resistant fiber" teflon PTFE the same chemical composition but different physical structure) chemical coating, the surface tension of the enhancement of the fabric to make water tightening and cannot be spread out as far as possible, infiltration of fabric surface, thus unable to through the porosity of the fabric tissue. At the same time, the coating is porous, and the water vapor in a single molecular state can be distributed to the surface of the fabric through the capillary channels between the fibers.
4 .How can we obtain the windproof effect of the fabric?
|Rely on the density of the fabric itself to achieve windproof effect||
The most typical examples are knitted fabrics and woven fabrics . The woven fabrics are not as porous as knitted fabrics due to their high density and interlacing points. So when you wear it in winter, it's warmer, which means the wind doesn't leak out. In woven fabrics, the higher the density, the better the wind resistance, . But relying on the fabric density to prevent the wind is not better than through the coating or film processing of the fabric .
|Be coated or lamination||
Basically all fabrics can achieve wind proof effect through this kind of means . It can accomplish a bit not ventilated, namely breathability test is zero .
5 . More pictures:
Contact Person: admin