|57 / 58 ''
outdoor water resistant fabric,
waterproof clothing fabric
100%P Weft Stretch Water Repellent Outdoor Fabric Supplier Two-tone Look For Skiing Winter Jacket
1 . Descriptions:
In the winter, if you want to do some sports in the outside, you need some winter wear to keep you warm. And also these clothes should be water repellent and comfortable.Our this fabric is 100% polyester,75D*75D+75D. The weight is 137GSM. And we do dyeing process and make a clear lamination . So this fabric is suitable for making jacket , pants or gloves in the winter.
According to your requirments , we can do many processes of finishing to get different functions, just like coated , lamination ,bonding or etc.
2 . Specifications:
|100%P Weft Stretch Water Repellent Outdoor Fabric
|various colors available
|can meet REACH,ROHS,EN71-3
|by rolls as 50m or according to your requirements,polybags,vacuum packing
3 . About Water Reprllent :
Water repellent (W/R) means that while reducing the adsorption of water by the fabric, the water does not immediately penetrate the cloth surface, but forms water droplets. The water repellent finished fabric will still penetrate when the water stays for a long time, but it has better breathability and comfort than the waterproof finishing.
The clothes after the water repellent finishing can prevent the fabric fabric from being exposed to water, and the daily clothing is not treated with water repellent treatment. When the rainwater is almost immediately wet, the textile fabric that has been treated with water repellent can give the fabric moisture proof in a short time. The anti-penetration effect can temporarily prevent the weaving of the textile fabric when a small amount of water is encountered; it is still possible to keep the fabric dry after wiping off the water drops on the textile fabric for a certain period of time.
4 . How To Get The W/R Function:
Water repellent, that is, water repellent, or waterproof, can be passed through the coating process, or after finishing with a water repellent process (padding).
Through the coating to achieve moisture permeability by dry direct coating, transfer coating, foam coating, phase inversion or wet coating (coagulation coating) and other process technologies, a variety of waterproof, moisture permeable functions The coating agent is applied to the surface of the fabric such that the pores of the surface of the fabric are closed or reduced to a certain extent by the coating agent, thereby obtaining water repellency.
After finishing, add water repellent, by adding water repellent in the post-treatment of the fabric, that is, the usual padding, and then drying and setting. The higher the drying temperature, the better the waterproof performance.
5 .More pictures:
Contact Person: Ms. Sara Shi